192.168.1.2 Router Login
192.168.1.2 is rarely a router. It is normally the first address handed out on a 192.168.1.x network, which makes it an extender, a bridged modem or a second router.
Which routers answer on 192.168.1.2
If your gateway is 192.168.1.1, then .2 is the next address in the range and typically goes to whatever device was connected first. Range extenders, powerline adapters and modems placed in bridge mode all commonly end up here.
This matters because people looking for this address are usually trying to configure a secondary device and have assumed it is their router. It generally is not. Configuring the extender at .2 will not change your Wi-Fi password, because the network is being served by the router at .1.
Signing in
- 01
Connect to the router first
Join its Wi-Fi or plug into a LAN port. A private address is unreachable from mobile data or from any other network, so this step is not optional.
- 02
Open the address properly
Type
http://192.168.1.2in the address bar rather than the search box. - 03
Accept the certificate warning
Routers rarely carry a trusted TLS certificate. On your own hardware the warning is expected; choose Advanced then Proceed.
- 04
Sign in and change the password
Check the sticker on the unit first — it overrides any published list. Then replace the factory admin password before you do anything else.
Default logins for 192.168.1.2
Factory credentials for the hardware most often found on this address. Where the label on your unit disagrees, the label wins.
| Brand / model family | Username | Password |
|---|---|---|
| Range extenders | admin | admin |
| Bridged modems | admin | Printed on label |
| Powerline adapters | admin | admin |
| Secondary router | admin | admin |
More brands: the full default password reference.
192.168.1.2 not opening?
Because this address is usually assigned by DHCP rather than fixed, it can move. If the device is not there any more, find it by name in your main router client list rather than guessing at addresses.
The fastest way to settle it is to read the gateway address off the device in your hand rather than working down a list. On Windows run ipconfig and read Default Gateway; on macOS open System Settings › Network › Details › TCP/IP and read Router.
Full diagnostic sequence: eight fixes for a router login page that will not load. Compare every address: the router IP directory.